https://wiki.altspaceseattle.org/ 2026-04-18T12:40:07+00:00 https://wiki.altspaceseattle.org/ https://wiki.altspaceseattle.org/_media/wiki/logo.png text/html 2026-04-11T05:45:31+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.altspaceseattle.org/laserworks/start?rev=1775886331&do=diff Laserworks Before you begin Here's a checklist of things which need to be done before using the laser in no particular order. * Ensure that both the machine itself and the cord for the compressor are plugged in and the machine is switched on. * text/html 2026-04-14T06:00:36+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.altspaceseattle.org/laserworks/technical_details?rev=1776146436&do=diff Technical Details General Information The laser is running an esp32 based control board running FluidNC. It is configured via a config file which you can access over the usb serial interface and the web installer. FluidNC is made to be compatible with GRBL flavored gcode but does not allow configuration for many things over gcode like the original grbl firmware.